Imojula ye-CR013 PLUS HF RFID TYPE-AB Reader

Incazelo emfushane:


  • Inombolo yomkhiqizo:I-CR013 PLUS HF RFID Reader Module TYPE-AB,MIFARE®1K 4K MIFARE®Ultralight® C Ntag Serial, MIFARE® DESFire®
  • isici somkhiqizo:I-CR013 PLUS HF RFID Reader Module ISO15693 TYPE-AB
  • Ifanele:I-MIFARE®1K 4K MIFARE®Ultralight® C Ntag Serial,MIFARE® DESFire®
  • Imininingwane Yomkhiqizo

    Omaka bomkhiqizo

    Ukucaciswa

    I-32-bit eyehlisiwe ye-instruction set set computer (RISC) izakhiwo

    Ku-chip, amabhayithi angu-16K wememori yokufinyelela okungahleliwe (i-SRAM):

    Ibhayithi yomjikelezo owodwa, igama elinguhhafu (16-bit), negama (32-bit) liyafundeka futhi libhale

    Inkumbulo eku-Chip: Imikhiqizo yethu ihlanganisa amabhayithi angu-16K wememori emile yokufunda kuphela (i-ROM) ngokuqondile ku-chip.Inikeza ukufinyelela kokufunda okuphumelelayo ngokucubungula umjikelezo owodwa we-byte, isigamu segama (16-bit) kanye negama (32-bit) imisebenzi.Ukwengeza, ihlanganisa amabhayithi angu-256K wememori ye-flash eshumekiwe (EFLASH) yokugcina idatha kanye nokubuyiswa.

    Izilawuli ze-USB: Izilawuli zethu ze-USB zenzelwe ukuthobela izinga le-USB 2.0.Ine-PHY block ehlanganisiwe yokuqinisekisa ukuxhumana okungenamthungo namadivayisi we-USB.Igunyazwe ukusebenza kwe-USB enesivinini esikhulu (480MHz) kanye nesivinini esigcwele (12MHz).Isixhumi esibonakalayo se-UTMI+ level 2 se-transceiver sinika amandla ukudluliswa kwedatha okuthembekile futhi sisekela amaphoyinti angu-8 wokudlulisa/wokwamukela (ep0, ep1, ep2, ep3, ep4, ep5, ep6, ep7).

    Ukufinyelela kumakhadi e-Ultragith® C, e-MIFARE Plus®: Imikhiqizo yethu inikeza ukufinyelela okusheshayo, okuvikelekile kumakhadi e-Ultragith® C nawe-MIFARE Plus®.Sekela i-AES, i-RSA, i-DES namanye ama-algorithms wokubethela ukuze uqinisekise ukuvikelwa okuthembekile kwedatha ebucayi.Ukudluliswa kwedatha kuyashesha futhi kuthembekile ngenxa yobuchwepheshe be-Jet Fast.I-NXP RC522 noma i-RC523 ye-ICs yesifundi samakhadi ahambisana ne-TYPE A kanye namakhadi ohlobo A & TYPE B, ahlinzeka ngokuhambisana kwamakhadi ngezindlela ezihlukahlukene.

    amaphoyinti wokugcina(ep0,ep1,ep2,ep3,ep4,ep5,ep6,ep7)

    Aes, RSA, Des Jet Fast ukuvakashela amakhadi e-Ultralgith® C, MIFARE Plus®

    I-NXP RC522 noma i-RC523 Reader IC, isekela i-TYPE A Noma i-TypeA&TYPE B

    CR013 PLUS HF RFID Reader Module TYPE-A-B_03
    CR013 PLUS HF RFID Reader Module TYPE-A-B_04
    CR013 PLUS HF RFID Reader Module TYPE-A-B_01

    Ezobuchwepheshe

    Ukunikezwa kwamandla: 3V noma 5V, 40-80mA
    Isixhumi esibonakalayo: UART, USB HID, USB virtual RS232, USB CCID, USB ukulingisa Izinketho zekhibhodi;
    Isivinini sokudlulisa: Okuzenzakalelayo 19200 bps
    Ibanga le-R/W lifika ku-60mm ~ 100mm, kuya nge-TAG kanye nosayizi we-Antenna.
    Izinga lokushisa lesitoreji: -40 ºC ~ +85 ºC
    Izinga lokushisa lokusebenza: -25 ºC ~ +70 ºC
    I-CR013A Plus TYPE A isekela i-MIFARE® 1k ,4k,Ultralight® ,Ultralight® C, Ntag serial,
    Sle66r01P, MIFARE Plus® ,MIFARE DESFire® Pipe mod , C =TL 14443-4

    I-CR013B Plus UHLOBO BC=TL 14443-4


  • Okwedlule:
  • Olandelayo:

  • Bhala umlayezo wakho lapha futhi usithumelele wona